Lichtman, Ian D, Baas, Jaco H, Amoudry, Laurent O 
ORCID: 0000-0002-6592-6790, Thorne, Peter D, Malarkey, Jonathan, Hope, Julie A, Peakall, Jeffrey, Paterson, David M, Bass, Sarah J, Cooke, Richard D et al (show 4 more authors)
(2018)
Bedform migration in a mixed sand and cohesive clay intertidal environment and implications for bed material transport predictions.
GEOMORPHOLOGY, 315.
pp. 17-32.
Abstract
Many coastal and estuarine environments are dominated by mixtures of non-cohesive sand and cohesive mud. The migration rate of bedforms, such as ripples and dunes, in these environments is important in determining bed material transport rates to inform and assess numerical models of sediment transport and geomorphology. However, these models tend to ignore parameters describing the physical and biological cohesion (resulting from clay and extracellular polymeric substances, EPS) in natural mixed sediment, largely because of a scarcity of relevant laboratory and field data. To address this gap in knowledge, data were collected on intertidal flats over a spring-neap cycle to determine the bed material transport rates of bedforms in biologically-active mixed sand-mud. Bed cohesive composition changed from below 2 vol% up to 5.4 vol% cohesive clay, as the tide progressed from spring towards neap. The amount of EPS in the bed sediment was found to vary linearly with the clay content. Using multiple linear regression, the transport rate was found to depend on the Shields stress parameter and the bed cohesive clay content. The transport rates decreased with increasing cohesive clay and EPS content, when these contents were below 2.8 vol% and 0.05 wt%, respectively. Above these limits, bedform migration and bed material transport was not detectable by the instruments in the study area. These limits are consistent with recently conducted sand-clay and sand-EPS laboratory experiments on bedform development. This work has important implications for the circumstances under which existing sand-only bedform migration transport formulae may be applied in a mixed sand-clay environment, particularly as 2.8 vol% cohesive clay is well within the commonly adopted definition of “clean sand”.
| Item Type: | Article |
|---|---|
| Uncontrolled Keywords: | Bedform migration, Sediment transport, Mixed cohesive clay-sand, Physical and biological cohesion, Current and wave forcing, Tidal flats |
| Depositing User: | Symplectic Admin |
| Date Deposited: | 08 Mar 2019 15:15 |
| Last Modified: | 19 Jan 2023 00:57 |
| DOI: | 10.1016/j.geomorph.2018.04.016 |
| Open Access URL: | https://doi.org/10.1016/j.geomorph.2018.04.016 |
| Related URLs: | |
| URI: | https://livrepository.liverpool.ac.uk/id/eprint/3033952 |
Dimensions
Dimensions
