Tsopanos, Sozon
(2008)
Micro Heat Exchangers by Selective Laser Melting.
PhD thesis, University of Liverpool.
|
Text
507633.pdf - Unspecified Download (59MB) | Preview |
Abstract
Selective Laser Melting (SLM), a layer-based Solid Freeform Fabrication (SFF) process, was used to fabricate micro cross-flow heat exchangers from 316L stainless steel, bronze (Cu 90%, Sn 10%) and Inconel 718 powder. Their mechanical and thermal properties were determined using solid blocks of SLM material prior to the fabrication of the micro cross flow heat exchangers. Initially the process parameters for the fabrication of high density (>97%) parts for the different materials were defined. The mechanical and thermal properties of SLM parts were then measured. The tensile test results exhibited yield strength values superior to the parent metals, but also showed low tensile strength and ductility as a result of the inherent residual porosity (2-4%). Results obtained from the thermal conductivity of the stainless steel material system were in good agreement with the bulk material values. The heat transfer performance of the heat exchangers with either micro channels or lattice structures as heat exchange surfaces was investigated experimentally and the results were evaluated in terms of geometry and materials. The performance of the micro heat exchangers was found to be dependent not only on the choice of material but also on the heat exchanger media geometry.
| Item Type: | Thesis (PhD) |
|---|---|
| Depositing User: | Symplectic Admin |
| Date Deposited: | 20 Oct 2023 09:25 |
| Last Modified: | 20 Oct 2023 09:34 |
| DOI: | 10.17638/03174533 |
| Copyright Statement: | Copyright © and Moral Rights for this thesis and any accompanying data (where applicable) are retained by the author and/or other copyright owners. A copy can be downloaded for personal non-commercial research or study, without prior permission or charge |
| URI: | https://livrepository.liverpool.ac.uk/id/eprint/3174533 |
Dimensions
Dimensions
