Identifcation of correlation between 3D surfaces using data mining techniques: a case study of predicting springback in sheet metal forming



El Salhi, Subhieh
Identifcation of correlation between 3D surfaces using data mining techniques: a case study of predicting springback in sheet metal forming. [Unspecified]

This is the latest version of this item.

[img] Text
El-SalhiSub_Oct2014_2003879.pdf
Available under License : See the attached licence file.

Download (10MB)
[img] Text
El-SalhiSub_Oct2014.pdf
Available under License : See the attached licence file.

Download (10MB)

Abstract

This thesis presents data mining research work undertaken in the context of identifying correlations between 3D surfaces. More specifcally, this research is directed at predicting distortions (referred to as springback) in sheet metal forming. The main objective was to identify a mechanism that \best" serves to both capture e�ectively 3D geometrical information while at the same time allowing for the generation of e�ective predictors (classi�ers). To this end, three distinct 3D surface representation techniques are proposed based on three di�erent concepts. The �rst technique, the Local Geometry Matrices (LGM) representation, is founded on the idea of Local Binary Patterns (LBPs), as used with respect to image texture analysis, whereby surfaces are de�ned in terms of local neighbourhoods surrounding individual points in a 3D surface. The second technique, the Local Distance Measure (LDM) representation, is inf uenced by the observation that springback is greater further from edges and corners, consequently surfaces are de�ned in terms of distance to the nearest edge or corner. The third technique, the Point Series (PS) representation, is founded on the idea of using a spatial \linearisation" with which to represent surfaces in terms of point series curves. The thesis describes and discusses each of these in detail including, in each case, the theoretical underpinning supporting each representation. A full evaluation of each of the representations is also presented. As will become apparent, the PS technique was found to be the most e�ective. The presented evaluation was directed at predicting springback, in the context of the Asymmetric Incremental Sheet Forming (AISF) manufacturing process, in such a way that an enhanced version of the desired 3D surface can be proposed intended to minimise the e�ect of springback. For the evaluation two at-topped, square-based, pyramid shapes were used. Each pyramid had been manufactured twice using Steel and twice using Titanium. In addition this thesis presents some idea on how the springback prediction mechanism can be incorporated into an \intelligent process model". The evaluation of this model, by manufacturing corrected shapes, established that a sound prediction framework, incorporating the 3D surface representation techniques espoused in this thesis coupled with a compatible classi�cation technique, had been established.

Item Type: Unspecified
Additional Information: Date: 2014-10 (completed)
Depositing User: Symplectic Admin
Date Deposited: 14 Oct 2020 15:25
Last Modified: 14 Oct 2020 15:25
URI: http://livrepository.liverpool.ac.uk/id/eprint/3036381

Available Versions of this Item