Zhu, G, Whitehead, D, Perrie, W, Allegre, OJ, Olle, V, Li, Q, Tang, Y 
ORCID: 0000-0002-4232-2513, Dawson, K ORCID: 0000-0003-3249-8328, Jin, Y, Edwardson, SP ORCID: 0000-0001-5239-4409 et al (show 2 more authors)
(2018)
Thermal and optical performance characteristics of a spatial light modulator with high average power picosecond laser exposure applied to materials processing applications.
.
Abstract
A spatial light modulator (SLM) addressed with Computer Generated Holograms (CGH's) can create structured light fields when an incident laser beam is diffracted by a phase CGH. The power handling limitations of SLMs based on a liquid crystal layer have always been of some concern. Now, with careful engineering of chip thermal management, we present the detailed optical phase and temperature response of a liquid cooled SLM exposed to picosecond laser average powers up to 220W at 1064nm - new knowledge critical for determining device performance at high laser powers. SLM chip temperature rose linearly with incident laser exposure, increasing by only 5°C at 220W incident power, measured with a thermal imaging camera. Thermal response time with continuous exposure was 1-2 seconds. The optical phase response with incident power approaches 2π radians with average powers up to 130W while above this power, liquid crystal thickness variations limit phase response to just over π radians. These remarkable performance characteristics show that liquid crystal based SLM technology is highly robust when efficiently cooled. High speed, multi-beam plasmonic surface micro-structuring at a coverage rate of 8cm2s-1 is achieved on polished metal surfaces at 25W exposure, while diffractive multi-beam surface ablation on stainless steel at an ablation rate of ∼4mm3min-1 is demonstrated with average power 100W. Continuous exposure for many hours exceeding 100W laser power did not result in any detectable drop in diffraction efficiency hence no permanent changes in SLM phase response characteristics have been observed This research work will help to accelerate the use of liquid crystal SLMs for both scientific and ultra-high throughput laser-materials micro-structuring applications.
| Item Type: | Conference or Workshop Item (Unspecified) |
|---|---|
| Uncontrolled Keywords: | Spatial light modulator, active cooling, high power laser micro-machining, high average power picosecond laser |
| Depositing User: | Symplectic Admin |
| Date Deposited: | 10 May 2019 08:25 |
| Last Modified: | 19 Jan 2023 00:46 |
| DOI: | 10.1016/j.procir.2018.08.080 |
| Open Access URL: | https://doi.org/10.1016/j.procir.2018.08.080 |
| Related URLs: | |
| URI: | https://livrepository.liverpool.ac.uk/id/eprint/3040568 |
Dimensions
Dimensions
